点胶机
Home >> News >> company news

News

PRODUCT  /  PRODUCT CENTER

Intelligent manufacturing new start-uv dispenser manufacturers

Intelligent manufacturing new start-uv dispenser manufacturers

Date of release:2019-02-21 Author:admin Click:

Check the machine cleanliness, air pressure, material drainage line

What should I pay attention to when using the automatic dispenser? There are still quite a few problems to pay attention to when using this machine. For example, the machine should be cleaned after work every day. When the machine is going to work the next day, a simple inspection of the machine should be done. In addition, it needs to be changed before changing another glue. Carry out corresponding treatment, if you find that the generated water vapor or air pressure is abnormal during use, you must know how to deal with such problems and so on. Let's take a look at some common problems that need to be paid attention to during the usual use.

点胶机厂家

Method for changing glue of glue dispenser

The first issue to pay attention to during the use of the automatic dispenser is to replace different glues. Before the replacement, all the pipelines inside should be cleaned, and then the inlet valve should be closed, the discharge port should be opened, and all the residual glue cleaned inside should be cleaned out, and then the discharge port should be closed again to open the inlet , Pour the cleaning solvent into it again to clean it, and you need to rinse all the inside to replace it with new glue.


Check and clean all important parts

If it is found that there is water vapor in the process of use, or the air pressure inside is abnormal, then it is necessary to check whether there is a problem with the filter, and whether there is a problem with the air pressure source. When using it, you must remember to apply vacuum. If you do not apply vacuum, it is easy to cause a large amount of gas or bubbles in the colloid, which will cause the glue to be very uneven, and may even seriously affect the quality of the product.


Clean and maintain the dispenser and working environment

Cleaning and maintenance of machinery is also essential. Holiday maintenance can extend the life of the machine. It is not only necessary to carry out cleaning and maintenance in the process of use, but also to carry out cleaning and maintenance after use, especially like continuous operation. It ’s been a long time, maybe all kinds of glue are available everywhere, so the surrounding ground should also be cleaned, and if there is glue on the walls, it should be cleaned, so that you have a better working environment. At the same time, it can also ensure that the machine can run in a clean environment.


Other considerations

Some precautions during the operation of the automatic dispenser are simply introduced here. Also note that the longer the machine is used, then it is not used or the production line does not need to be glued. Under operating conditions, you can unplug the power supply, which can play a role in saving electricity, and you can turn on the machine again when you need to apply glue.





The address of this article:http://en.dg-czzn.com/news/375.html

Key word:Dispensermanufacturers,DispensermanufacturersinDongguan,UVdispensermanufacturers

Recent:

code

Scan QR code

分享 一键分享