Working in the automatic dispenser manufacturers, good operating habits can keep the dispensing equipment in a good state, and at the same time can guarantee the production safety of the operators, which is extremely beneficial to production. Which ones? Automatic dispenser manufacturers talk to you about the operating specifications of the dispenser:
When the device is powered on, do not use force to move the X, Y, and Z axes; during the production of the device, please do not press the button of the device at random except for normal operation; when the glue is used up, you need to stop the device and wait for replacement Continue to run after the glue is ready; when the dispenser is working, keep the input air pressure within 6 kg;
The dispenser is prohibited to work in a dusty environment; keep the dispenser table clean and clean, and do not drip the glue into the machine; when manually moving the dispenser, do not directly lift the X axis, start from the bottom plate ; Do not put heavy objects on the plane of the equipment, keep the work surface flat;
According to the production arrangement, clean the needle mouth, syringe and other accessories in time to avoid the residual glue causing curing to be difficult to clean; do not put the syringe with glue close to overheated or too hard objects (except when required); when the machine is running, please Do not touch the needle with your hand, so as not to hurt your hand; avoid placing the machine in a relatively humid and corrosive gas-liquid environment; keep the input air dry, clean, and free of debris; do not touch it casually after the power is turned on ,touch.