点胶机
Home >> News >> Industry News

News

PRODUCT  /  PRODUCT CENTER

How about panel light dispenser, take you to understand

How about panel light dispenser, take you to understand

Date of release:2020-02-25 Author: Click:

With the advancement of technology and development of panel light dispensers, the lighting equipment has changed dramatically, from the initial torch to the oil lamp, to the incandescent lamp, halogen lamp, fluorescent lamp, steam lamp, to today's health and environmental protection LED lamp. As a branch panel light among LED lights, it is widely used in enterprises, supermarkets, hotels, hospitals and other places because of its characteristics of good uniformity of illumination and soft and environmental protection.


In the production and assembly of LED panel lights, the most important thing is the process of light bar mounting, which determines the quality of LED panel lights. However, in our current observations in the majority of factories, it is found that the general manufacturers are not highly automated, and generally use a desktop dispenser to complete the dispensing operation, and then manually paste the light bar. In this case, it is easy to mount the inconsistent quality of the product, and because it is manually mounted, it will appear that when you paste a few light bars behind, the glue has hardened a bit. Therefore, the quality of placement is seriously affected.


Although there are not many automation devices produced in response to this situation, there are still some. For example, VIA Automation has developed such a device. At present, the equipment has been on the market, and some manufacturers have begun to use such equipment. Compared with the non-standard customized production lines used by general large-scale lamp manufacturers, such equipment is not so high in terms of cost investment, occupation of production area, and personnel skill requirements, which is more suitable for small and medium-sized enterprises. The equipment is a full-automatic dispensing and pressing device for panel lights, which is divided into three parts: a light bar fixture, a dispensing device and a pressing device. In the production process of the panel light, first put the light bar and the back plate into the fixture and the pressing device, and then press the start button, the fixture moves through the Y-axis module to the dispensing valve of the dispensing device. The dispensing valve starts the dispensing operation after receiving the signal. After the dispensing is completed, it moves to below the pressing device. After the pressing device recognizes it, it starts to stick the light bar.


The equipment is a full-automatic dispensing and pressing device for panel lights, which is divided into three parts: a light bar fixture, a dispensing device and a pressing device. In the production process of the panel light, first put the light bar and the back plate into the fixture and the pressing device, and then press the start button, the fixture moves through the Y-axis module to the dispensing valve of the dispensing device. The dispensing valve starts the dispensing operation after receiving the signal. After the dispensing is completed, it moves to below the pressing device. After the pressing device recognizes it, it starts to stick the light bar.


The use of such light bar mounting equipment has changed the original shortcomings of pure manual work. There is no problem of inconsistent placement. The pressing device is formed at a time, ensuring the unity of each product and reducing the occurrence of defective products due to manual misoperation.


The address of this article:http://en.dg-czzn.com/news/457.html

Key word:Panellightdispenser

Recent:

code

Scan QR code

分享 一键分享