The daily maintenance of Dongguan dispensers directly affects the service life of Dongguan dispensers. The daily work of Dongguan dispenser maintenance has a great influence on the service life of Dongguan dispensers, including the smoothness of the normal use process. The following are the daily maintenance steps of Dongguan dispensers:
1. To replace the rubber type, the pipeline needs to be cleaned. At this time, first close the feed valve, open the discharge valve, and discharge the remaining rubber material in the rubber bucket. Out rinse.
2. Air pressure intake is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check the air pressure source for any abnormalities. Before the glue dispenser is used in large quantities in Dongguan, please try it in a small amount and master the use skills of the product to avoid errors. When the test is ok, then use the double drop glue machine or double liquid glue filling machine for mass production; The vacuum system performs vacuum defoaming treatment on the glue to eliminate the bubbles generated during the stirring process, or let it stand for 10-20 minutes before use, so that the bubbles generated during mixing can be eliminated in time, and the more glue mixed together.
3. Please wipe the machine regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so it is necessary to mix the glue according to the actual production situation, otherwise it will cause a waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.
4. Unplug the power supply when the machine is not used for a long time, which will not only prolong the life of the machine but also save a lot of electricity costs. With the ever-changing needs of industrial development, liquid control technology and dispensing equipment are also constantly developing to ultra-high precision control and diversification and specialization.
Note: After each use, do a good job of cleaning, and wipe where you can see it. Wipe with alcohol. It is best to apply motor oil or butter to the frequently exercised parts to keep it lubricated. If you do n’t use it for a long time, you must polish the glue. Otherwise, it will be solidified in the LED Dongguan dispenser and it will cost money to clean up, which is very troublesome.