点胶机
Your current location : Home >> Products >> Non-standard automation equipment

PRODUCTS   /  PRODUCT CENTER

Product

Product center

Double Speed Chain Link Assembly Line

DESCRIPTION

PRODUCT DESCRIPTION

Double Speed Chain Link Assembly Line

倍速链环型组装线

倍速链环型组装线

 

Dynamic differential ring assembly line


One. Project: LED lighting assembly line


two. Specifications: Length: L15000mm × width W1500mm (bilateral) × height: H750mm


three. Quantity: 1


four. Station design: 22 stations on both sides


Fives. Material selection and description:


1) Assembly line


a) Road rail: Huaping Aluminum 912 profile production.


b) Conveyor chain: Shanghai special triple speed chain, T = 38.1


c) Support frame: made of 40 × 60mm aluminum material, with M14 foot cup, adjustable within ± 25mm.


d) Lamp stand: made of 40 × 40mm aluminum material, bilaterally installed 40W single lamp fluorescent lamp with cover, arranged in a row, the lighting needs to be equipped by the party.


e) Air pipe: It is installed in the middle of the lamp holder and the bottom of the tripod. It adopts 6-point galvanized pipe, and each station is equipped with a quick nozzle.


f) Lifting slot: special aluminum profile guide rail, each station is equipped with a lifting wheel.


g) Craft hanger: Special “H” type aluminum profile craft drawing hanger is set on both sides of the wire body, and each station is equipped with a set of A4 acrylic craft kanban.


h) Instrument panel: It is set in a light stand, made of 18mm plywood, with a width of 400mm, and a white fireproof board on the surface; "T" plastic edging.


i) Keel: A 6-point galvanized tube is installed on both sides of the trachea at the bottom of the tripod.


j) Trunking socket: adopt δ1.0mm cold plate bending forming to make the trunking, and install a three-position universal socket for each station on both sides.


l) Surface treatment: part of the wire body iron material computer color paint.


2) Production line power mechanism


a) Motor: Taiwan brand 1, 5KW Ashba Motor 380V.


b) Teeth box: Taiwan brand Ashba 100 type 1:60 tooth box.


c) Transmission mechanism: Suzhou special chain dedicated sprocket, Ø50mm active shaft.


d) Tensioning mechanism: special tensioning seat for Suzhou special chain.


e) Frame: made of 40 × 40mm iron steel.


f) Surface treatment: computer color paint.


3) Left and right translation mechanism


a) In and out board power: Taiwan imported TWT60 miniature gear motor.


b) Left and right translational force: Taiwan imported TWT60 miniature gear motor.


c) In and out board conveying: Danish imported green anti-skid belt.


d) Pan left and right: Nylon wheels are used for walking on the rails.


e) Surface treatment: computer color paint.


7) 22 assembly stations (bilateral)


a) In and out board power: Taiwan imported TWT60 miniature gear motor.


b) In and out board transportation: Danish imported green anti-skid belt.


c) The bridge is made by bending and forming δ3mm steel plate.


D) Surface treatment: the bridge is painted by computer color.


e) The size is: specification W600mm × 1200mm,


f) Surface treatment: the bridge is painted by computer color.


8) Bilateral workbench


A) Bilateral with long workbench,


b) Specification: 300 mm, the table is made of high quality core board with δ = 15mm,


c) The green fireproof board is attached to the surface, and the semicircular wooden strips are edging.


9) Tooling board (bilateral) 22


a) Specification W600mm × 1200mm, the tooling board is made of imported δ20mm large core board, with non-slip rubber on the surface, T-shaped plastic edging, green fireproof board on the bottom, and a two- or three-position long box socket on it.


b) Install L150 × W20 × H30mm product positioning rubber strips on both sides of the board surface, the distance between the two is 450mm.


10) Control system


a) The main control adopts PLC program controller imported from Japan.


b) The on-off of each motor adopts Fuji contactor and protector imported from Japan.


c) Intermediate relays and travel switches are made of Japanese OMRN brand electrical appliances.


d) Slot type induction switch is used for stroke positioning.


The whole line body is computer white spray plastic, and the aluminum alloy profile is the primary color.


 


PARAMETERS

TECHNICAL PARAMETERS

Label:Ringassemblyline,Doublespeedchainassemblyline,DongguanDoubleSpeedChainRingAssemblyLine

code

Scan QR code

分享 一键分享