点胶机
Your current location : Home >> Products >> Non-standard automation equipment

PRODUCTS   /  PRODUCT CENTER

Product

Product center

Ring drum assembly production line

DESCRIPTION

PRODUCT DESCRIPTION

Ring drum assembly production line

环形滚筒组装生产线

Unpowered hand push ring assembly line


1. Engineering project: assembly production line


2. Line body specification; L15000 × W1500 (bilateral) × H750㎜


3. Number: 1 set


Four, configuration instructions:


2) Machine frame: made of high quality aluminum material of 40 × 40 × δ1.5mm, 16 sets of every 2 meters, using M12 × 80


㎜ Galvanized adjustable foot cup.


3) Machine body: made of high quality aluminum material of 40 × 40㎜ × δ1.5mm, laid along the two sides of the line body, the total ring shape is 32 meters


4) Carrying plate: made of §1.0㎜ galvanized sheet hydraulically, the whole line layout, a total of 300,000㎜, installed every 2 meters


Set of φ38 × 600㎜ galvanized drag reduction rollers.


5) Conveying: adopting Raffles wheel bull's eye and C212A unilateral folding plate chain, pitch t = 38.1mm.


6) Object table: The table is made of 15mm Tai core board with milky white fireproof board on the surface. It is arranged along the middle of the line body and installed in the middle with a width of 300mm.


7) Lighting system: made of 40 × 40 × δ1.5mm high-quality aluminum material, 28W single-support T5 electronic energy-saving bracket with cover is adopted, and the whole line is arranged bilaterally.


8) Tooling board: Specification W600mm × 1200mm, made of 25% large core plywood, covered with green rubber T-shaped rubber strips. The tripod is made of W30mm × 30mm aluminum, and the surface is rust-sprayed and sprayed.


Tooling board (bilateral) 22


a) L1200 × W600mm tooling board is made of imported δ20mm large core board, with anti-slip rubber on the surface, T-shaped plastic edging, and green fireproof board on the bottom


b) Install L150 × W20 × H30mm product positioning rubber strips on both sides of the board surface, the distance between the two is 450mm.


   8) Gas pipe: It is made of 4 points galvanized pipe, and each station is equipped with a set of quick gas nozzle joints, which are arranged along the middle of the line body.


   9) Craft card: FD01 special aluminum slide rail is selected, and each station is equipped with an A4 plexiglass plate in the middle.


 10) Color: The whole line body is computer white spray plastic, and the aluminum alloy profile is the primary color.



PARAMETERS

TECHNICAL PARAMETERS

Label:Rollerassemblyline,Dongguanassemblyline,Assemblylinesupplier

code

Scan QR code

分享 一键分享